How to Power Cycle Netgear AC1900 Router?

Are you experiencing network connectivity issues with your Netgear AC190 router? Yes? Performing a complete power cycle of your home network might be of some help. As reported by many Netgear users, the power cycling process works wonders when it comes to resolving connectivity issues with the Netgear devices. So, we have jotted down the entire process of power cycling Netgear AC1900 to fix certain issues with your WiFi network.

Why Power Cycle Netgear AC1900?

By power cycling your Netgear AC1900 router, you will be able to fix these issues:

• Unable to get through the AC1900 initial setup process.
• No internet access on the Netgear router.
• The LEDs on the Netgear AC1900 WiFi router are behaving unusually.
• You can’t access the router’s network on any device.
• You can access the network but it is slow and intermittent.

Along with the issues mentioned above, some temporary technical bugs also get cleared out making the Netgear wireless router work its best.

What Does Power Cycling Netgear AC1900 Do?

Every time your technical device creates an issue, what comes to your mind instantly? It is to turn the device off for some time and turn it on. Exactly! This is what power cycling does. All you do is eliminate some temporary technical glitches with a simple power cycle process. Also, you let your technical device have some rest as overheating and excessive usage also cause some issues with technical devices. Now that you have gained sufficient knowledge about what the power cycling process does, let us now head towards telling you how to power cycle Netgear AC1900.

How to Power Cycle Netgear AC1900 WiFi Router?

To power cycle the Netgear router, you need to turn it off and again turn it on. Also, disconnect the networking devices that are accessing its network. What are the networking devices now? So the Netgear AC1900 router, modem, computers, laptops, smartphones, printers, CCTVs, gaming consoles, etc. come under the category of networking devices. Simply put, anything that accesses a internet connection (Wired or Wireless) is a networking device.

To make sure the home network is properly power cycled, there is a sequence that you need to follow while turning them off and on. As per the topology of your home network, here are the instructions that you must follow for running a smooth power cycling process:

Power Cycling Netgear Router:

• First of all, remove any device that is accessing the Netgear AC1900 network. You may need to access their settings to do this step.
• Next, you need to power off your Netgear AC1900 router by turning the power button off and then disconnecting its power cable from the wall socket. Also, remove any other cable connected to it.
• Thereafter, power off your modem as well.
• Wait for some time; say for a couple of minutes. The devices are cooling down now.
• Now, begin by plugging in the modem to the power socket and turning the power supply on. As soon as it is booted up, you can proceed to the next step. You can see the LEDs on the modem to make out if it is booted up completely or not.
• Let your modem regain its working status.
• After this, power up the Netgear AC1900 router. So, plug it into an active power socket and let it boot up completely. The stable LEDs will be an indication of a fully booted-up router.
• It is now time to connect your Netgear router to the modem. Thus, fetching an Ethernet cable is recommended. Insert one of its ends into the respective Ethernet port of the Netgear AC1900 router and the other end into that of the modem.

Bonus Tip: You can also reboot or power cycle your Netgear AC1900 router using the web-based management utility via the Netgear router default IP address or the web address.

To Briefly Conclude

Here we conclude our helpful blog that is meant to provide you with information about how to power cycle your home network including the Netgear AC1900 router. Most of the connectivity issues get kicked out easily with the power cycle process. However, if you feel that you need further assistance in resolving any issue, then know that our technical expert team is always on its toes to lend you a helping hand to get the issue at hand fixed instantly.