I Don’t Have a WiFi-enabled Device. How to Set up Netgear Extender?
So, you are going through the Netgear extender setup process! One of the setup steps requires you to have access to a WiFi-enabled device, right? Oh no! You don’t have any WiFi-enabled device. Now, what to do? How would you set up your Netgear range extender? Don’t feel out of luck! You can set up Netgear extender using a hardwired connection too.
Yes, you read that absolutely right! This post will ring up the curtains from the setup process of Netgear range extender without any WiFi-enabled device. Let’s take the plunge.
Set up Netgear Extender Without Any WiFi-compatible Device
Here’s a step-by-step guide to follow for setting up your range extender if you don’t have any WiFi-enabled device:
Step 1 – Power on Your Extender
First and foremost, plug your Netgear range extender into an active power source. Be sure that the electrical source you are using is providing a steady power supply to your extender.
Step 2 – Make a Hardwired Connection
After your turn on your Netgear extender, create an Ethernet cable connection between your extender and the existing router. Now, use a desktop PC and connect a LAN cable to it. To make sure that the cable is properly connected to your PC, check the LED status on your computer. On the off chance if the LEDs are lit up, it indicates that the connection has been made in a proper way.
Step 3 – Access Your Netgear WiFi Extender
As soon as you have made the required wired connections, launch your favored web browser. Head over to the mywifiext web-based page. The page requires you to create an account using your email ID and password.
Step 4 – Set up Netgear Extender
Now, you have to select the network you want to extend using your Netgear range extender. Next, set up a password for the extended network.
Step 5 – Apply Setting Changes
It’s time to set up security settings for the extended WiFi network. Configure your Netgear range extender’s settings as per your requirements.
Step 6 – You are Done!
Now, find the appropriate place for your Netgear extender. Unplug the extender and place it anywhere in your home or workplace. Ensure that the extender is placed away from WiFi interference-creating devices such as microwaves, refrigerators, Bluetooth speakers, cordless phones, baby monitors, etc.
That’s how you can set up your Netgear extender using a hardwired connection. If you get stuck at any step, don’t hesitate to get in touch with our technical experts right now.
Use WPS Method
You can also use the WPS method for Netgear extender installation without any WiFi-compatible device. Here’s how:
- Insert your Netgear extender into a power outlet and make it turn on.
- Now, locate the WPS button on it.
- Once found, press the WPS button.
- The WPS LED will become solid green. This shows that your extender has properly configured with your WiFi router.
And there you are! In this way, you can install your Netgear wireless range extender without using any WiFi-enabled device. In case of any issue, reach out to our experts immediately. They will help you set up Netgear extender in no time.