Quick Guide to Fix Netgear PLP2000 Ethernet LED Solid Red Issue

Quick Guide to Fix Netgear PLP2000 Ethernet LED Solid Red Issue

Netgear PLP2000 Ethernet LED solid red issue has been bugging many users off recently. Are you also experiencing the same issue? Well, we are sorry to hear that. But, why worry when our high-tech experts can help you out? In this post, we have covered some of the topmost hacks with the help of which, the issue you are currently facing will get resolved within minutes. Thus, wait no more and stick to reading.

Fixed: Netgear PLP2000 Ethernet LED Solid Red

1. Check the Power Supply

One of the biggest reasons why you are stuck with the Netgear PLP2000 Ethernet LED solid red issue is because your wireless range extender is not getting an uninterrupted power supply from its wall outlet. And you know what is that?

It is because the power socket into which you have plugged your Netgear extender is damaged. To troubleshoot the issue, you should consider taking our advice, i.e. getting your existing power socket repaired.

What happened? You don’t want to do that? No problem. You can take the easier route and plug your Netgear PLP2000 extender into a different wall outlet.

2. Verify the Condition of the Cable

So, you followed the aforementioned troubleshooting hack but it did not help you resolve the Netgear PLP2000 Ethernet LED solid red issue? Well, that might be because the Ethernet cable used to establish a connection between your Netgear WiFi extender and router is either damaged or worn out.

To take care of this thing, we recommend that you connect your Netgear PLP2000 extender to your home router with the help of a non-damaged Ethernet cable. Indirectly, this means that you need to buy a new Ethernet cable to connect your devices.

Now, check whether the Netgear PLP2000 Ethernet LED solid red issue has bid farewell to you. If it hasn’t, waste no more in following the next troubleshooting step. For those of you, who don’t want to opt for this option, consider contacting our experts. Whether you ping them in the morning or at night, they are always available to assist you.

3. Reduce the Distance between Devices

If your Netgear extender is not placed within the range of the host router, that can also become a major reason behind the Netgear PLP2000 Ethernet LED solid red issue.
Therefore, consider bringing your devices closer. Wondering how you can do that? Well, it is simple. All you need to do is, follow the instructions mentioned below:

  • Unplug your Netgear extender from its existing wall socket.
  • Plug the extender into a socket located near the router.

Note: Yes, the distance between your devices should be less, but it should also be safe. By that we mean, that your extender and router should not be placed too close to each other. Or else, their WiFi signals may clash and you’ll be forced to face many troublesome issues.

4. Eliminate WiFi Interference

If sadly, none of the aforementioned troubleshooting hacks helped you rectify the Netgear PLP2000 Ethernet LED solid red issue, then it is because of WiFi interference.

Have a look around the room in which your Netgear wireless range extender is placed and see if it is filled with electronic devices, transmitting appliances, metal objects, or reflexive surfaces. If it is, then it’s a sign that you need to change the location of your extender.

While relocating your extender, ensure it is not being kept near the following things:

  • Mirrors
  • Fish tanks
  • Aluminum studs
  • Cordless phones
  • Washing machines
  • Baby monitors
  • Bluetooth speakers
  • Treadmills
  • Refrigerators
  • Microwave ovens
  • Televisions
  • Concrete walls

Also, maintain a clear line of sight between your extender and utensils containing water. These things can interfere with the signals emitted from your wireless range extender, thereby preventing it from performing well. Thus, you must follow this hack.

Once done, check again whether the Netgear PLP2000 Ethernet LED solid red issue has been resolved or not.

Final Words

With pride, we are wrapping up our guide on troubleshooting the Netgear PLP2000 Ethernet LED solid red issue. In case, even after following the aforementioned hacks, you are not able to fix the issue at hand, then take this opportunity to contact our experts. Let them help you out and ease the worry lines on your forehead.

Disclaimer: Mywifiextlog.net is a self-directed team of experts and years of experience in handling extender and routers related issues. All logos, brand names, images and trademarks used in the website are for referential purpose only. Mywifiext.net provides its expert services to customers who approach us directly via email or chat.