Why is My Netgear AC1750 Extender Not Connecting to Router

September 27, 2021 | Adam Hector

In order to perform Netgear AC1750 setup without any hassle, it is important that your WiFi range extender connects to the router. However, most users face issues while trying to do so. Are you one of them? If the answer is yes, then, first of all, relax! This issue isn’t that big to stress over. In this post, you’ll find everything required to troubleshoot the AC1750 extender not connecting to router issue. So, what are you waiting for? Read on.

Fixed: Netgear AC1750 Extender Not Connecting to Router

Fix 1: Check the Basic Points

Before you take help of any other troubleshooting tip to fix the issue at hand, ensure to check the following points:

Your Netgear AC1750 extender and WiFi router are receiving an adequate power supply from their wall socket.
The LED lights on both your WiFi devices is stable.
The hardware of your Netgear AC1750 WiFi range extender is not damaged.

If all these points have been taken care of, but you are still facing the Netgear AC1750 extender not connecting to router issue, then keep reading.

Fix 2: Place the Extender Close to the Router

If the distance between your WiFi devices is too much, then it’s quite obvious why your Netgear AC1750 extender is not connecting to the router. Therefore, it is recommended that you place your extender in the same room as that of the router.

Also, avoid placing your extender near electronic devices and transmitting appliances. The reason being, such appliances can interfere with the signals of your extender.

Fix 3: Power Cycle Your AC1750 Extender

Your AC1750 extender might also be refusing to connect to the router due to technical glitches. To get rid of the issue, power cycle your Netgear extender.

Mentioned below are the steps that’ll guide you with the process of power cycling your WiFi device:

Disconnect every WiFi-enabled device connected to the extender’s network, i.e. Netgear_ext.
Power off your AC1750 extender and unplug it from the wall socket.
Wait for some time and plug your device back into the power outlet.
Don’t forget to switch on your device.

Now, check whether the Netgear AC1750 extender not connecting to router issue has been resolved or not.

Fix 4: Change the Connection Source

Is your Netgear AC1750 extender connected to the WiFi router with a wireless source? Well, sometimes, connecting devices wirelessly is not a reliable option to consider as there’s always a chance for the connection to drop. This is another reason why your extender is not connecting to router.

To fix the issue, connect your extender and router using an Ethernet cable. Doing so will ensure that the connection between your devices stays intact.

Fix 5: Perform Netgear AC1750 Setup

An impartial Netgear AC1750 setup is one of the major reasons why your extender is not connecting to the router. Thus, make sure that you set up your AC1750 range extender properly.

In case you are doubtful regarding the setup process, either refer to the Netgear user manual or get in touch with our experts.

Fix 6: Reset Your AC1750 Extender

None of the aforementioned steps helped you fix the Netgear AC1750 extender not connecting to router issue? Well, then performing default factory reset is your last resort. In order to restore your device to its default settings, all you need to do is, press the Reset button on your device.

Once you are done resetting your AC1750 WiFi range extender, perform Netgear WiFi extender setup from scratch.

Wrapping Up

Facing the Netgear AC1750 extender not connecting to router issue is quite common amongst users. But, if you follow the troubleshooting tips mentioned in this post, trust us, you’ll surely be able to get rid of the issue. In case you get at stuck any point while trying to fix the issue, don’t hesitate to contact our technicians.