Working From Home: WiFi Extenders Are an Easy Way to Boost Coverage

With millions working from home due to the pandemic, it’s only normal to feel a little agitated because of a slow internet connection. But worry not, because setting up a Netgear WiFi range extender might just be the answer to your problem. Wondering how? Well, setting up an extender will not only provide you with a fast internet connection but also boost the coverage of the existing network. In other words, regardless of which room you sit in, you’ll have no trouble accessing the internet while working from home.

So, without any further ado, let’s get on with the Netgear extender setup process, shall we?

Step-by-Step Instructions to Set Up a Netgear WiFi Extender

1. Power On the Netgear Extender

The first step in line is to configure the hardware properly. To do that, here are the guidelines that you need to follow:

• Plug the device into a wall socket.
• Ensure that the power cable you are using is free of damages.
• Press the Power button on the Netgear range extender.
• Do not proceed further until the power LED light becomes green.

Note: If the power LED light doesn’t turn green, then you won’t be able to proceed further in setting up your Netgear WiFi range extender.

2. Connect the Extender and Router

Once the LED light turns solid green, grab a cable and build a connection between your extender and the WiFi router. Also, keep the following points in mind while trying to create a connection between both your WiFi devices:

• The cable that you’re using shouldn’t have any cuts or breakage.
• Get the cable replaced in case it is prone to damages.
• Or even better, make use of a WiFi source to connect your extender with the router.
• Then, connect your WiFi device to Netgear_Ext.

3. Install a Web Browser

As soon as you connect your device to the network, install an internet browser on your laptop. Then, follow the steps mentioned below:

• Open the web browser and access the mywifiext.net web page.
• To be more specific, enter www.mywifiext.net in the address bar of your web browser.
• Then, press the Enter key.

Note: You can also use the default IP address of your device to perform Netgear extender setup.

4. Enter the Default Login Details

Pressing the Enter will take you to the Netgear extender login page. If you are able to access the extender login page, then follow the steps mentioned below. In case you aren’t able to, then feel free to contact us. Whether you’re working from home or office, our highly qualified technicians are always available to assist you.

• Enter the default username and password of your WiFi extender.
• Be extremely careful while entering the default login credentials.
• You are free to take reference regarding the login details from the Netgear manual.
• Do not forget to hit Log In once you are done entering the extender login details.

5.Follow the On-Screen Prompts

Once you hit the Log In button, you will get redirected to the Netgear Genie Smart Setup Wizard. Follow the on-screen instructions displayed there to finish setting up your WiFi device.

Now, you can enjoy an uninterrupted internet connection while working from home. You can as many devices with your Netgear WiFi range extender as you want. Also, no matter where you sit, you’ll access the internet without facing any issues. On the off chance if you do, then simply get in touch with our experts. We are available 24/7 to clear all your doubts and queries at any hour of the day.